Services · Oakland Park

Dent Repair in Oakland Park, FL

We repair dents on your car, from small door dings to larger panel damage, and refinish the affected area afterward.

Dents Don't Have to Stay

A door ding in a parking lot, a crease from a shopping cart, a hail-dimpled hood — dents have a way of catching your eye every time you walk up to your car. At Extreme Auto Collision in Oakland Park, FL, we bring panels back to their original shape so the damage stops drawing attention and your car looks like itself again. Whether it's a single small dent or a panel that took a harder hit, we'll tell you honestly what it will take to make it right.

Signs You Need Dent Repair

Not every ding is obvious, and not every one is urgent — but there are a few situations where it's worth bringing your car in for a look.

  • A visible dent or crease in a door, fender, hood, quarter panel or trunk lid that bothers you every time you see it.
  • Dings from everyday life — runaway shopping carts, car doors in tight lots, a stray ball or a low-speed bump in traffic.
  • Hail damage, where the roof, hood and trunk pick up dozens of small, round dents at once.
  • Dents with paint damage — if the dent cracked, chipped or scraped the paint, bare metal may be exposed underneath, and that's where surface rust can start.
  • Dents near a body line or edge, which tend to be sharper and more stubborn than a dent in the open middle of a panel.
  • A dent that's changed how a part fits — a door that catches, a panel edge that no longer lines up cleanly with the one beside it.

If you're not sure how deep the damage goes or whether the paint is compromised, that's exactly the kind of thing we can assess in person. A dent that looks minor from one angle can hide a sharper crease or a stretched spot in the metal.

What Dent Repair Involves

There's more than one way to fix a dent, and the right method depends on the dent itself — its size, its location, how deep it is, and whether the paint is still intact. Part of our job is matching the repair to the damage so you're not paying for more work than the panel needs, and not getting a shortcut that won't hold up.

Paintless dent repair (PDR) is the go-to approach when the paint is undamaged and the metal hasn't been stretched too far. The idea is to work the metal back into shape from behind the panel, using specialized tools to massage the dent out gradually, or to lift it carefully from the surface. Done on the right kind of dent, PDR keeps your factory paint completely intact — nothing is sanded, filled or repainted. It tends to be the faster, less invasive option, which is why it's a strong fit for door dings, minor creases and hail dents.

Conventional dent repair comes into play when the paint is cracked or scraped, when the dent is sharp or on a tricky body line, or when the metal has been pushed too far for PDR to pull it back cleanly. Here the panel is reshaped, any damaged area is smoothed and filled as needed, then primed, painted and blended to match the surrounding finish. This method can address damage PDR can't, and it restores the paint where it's been broken — the trade-off is that it's more involved and touches the original finish.

The honest answer on which path is right usually comes down to looking at the actual dent. On some cars we'll recommend PDR and leave the factory paint untouched; on others, conventional repair is the only way to get a result that looks right and protects the metal. We'll walk you through the reasoning either way.

Why Choose Extreme Auto Collision

  • We work on demanding cars. Our bay sees everything from daily drivers to high-end sports cars — a Camaro ZL1 and a McLaren have been in mid-repair with us. The care those finishes demand is the same care we bring to your vehicle.
  • We match the method to the damage. You'll get a straight recommendation on whether paintless or conventional repair makes sense for your dent, not a one-size-fits-all answer.
  • We focus on the finish. A repaired panel should blend in, not stand out. We take the time to get the shape and the surface right so the fix disappears.
  • We're local and approachable. You can reach a real person, ask questions about your specific dent, and get a clear picture of what's involved before any work starts.

Our Dent Repair Process

  1. Look at the damage together. We inspect the dent, check whether the paint is intact, and feel out how the metal has moved.
  2. Recommend an approach. We tell you whether paintless or conventional repair fits, and explain the trade-offs so the choice makes sense.
  3. Reshape the panel. Using the right method for the dent, we bring the metal back toward its original contour.
  4. Address the finish. With PDR, the factory paint stays as-is; with conventional repair, we prime, paint and blend to match the surrounding panels.
  5. Check it under good light. We review the repaired area from several angles to confirm the shape and finish look right.
  6. Hand it back. We walk you through what was done before you drive away.

What Affects the Cost and How to Get a Price

Every dent is different, so the fairest way to price the work is to see the car. A few things move the number up or down:

  • The size and depth of the dent — a small door ding is a different job than a deep crease across a panel.
  • The location — dents on sharp body lines, panel edges or hard-to-reach spots take more skill and time than a dent in the open middle of a panel.
  • Whether the paint is damaged — intact paint may allow paintless repair, while cracked or scraped paint means refinishing is part of the job.
  • How many dents there are — hail damage with many small dents is a bigger undertaking than a single ding.
  • The panel and the vehicle — some panels and finishes are more involved to work on than others.

For a price that actually fits your situation, give us a call at (305) 975-9732. We'll talk through what you're seeing and arrange to look at the car so we can quote the real work in front of us rather than a guess.

Looking After the Result

Once a dent is repaired, keeping the panel looking right is mostly about ordinary good care. If your repair involved fresh paint, give the new finish time to fully cure before any heavy washing or waxing, and keep it out of harsh chemicals early on — we'll let you know what to watch for on your specific job. Regular hand washing helps you catch small chips or scrapes before they turn into something that can rust. To avoid new dents, park a little farther out in busy lots, leave room at the pump and the drive-through, and be mindful of carts and doors in tight spaces. None of it is complicated, and it keeps your car off the repair list.

Serving Oakland Park, FL and Nearby

Extreme Auto Collision is based on NE 45th Street in Oakland Park, FL, and we handle dent repair for drivers across the surrounding area. If you're nearby and have a ding, crease or hail-dented panel you want gone, we're an easy stop. Call (305) 975-9732 to describe the damage and set up a time to bring your car by — we'll take a look and tell you honestly what it'll take to make it right.

FAQ

Questions, answered

Straight answers about Extreme auto collision. Don't see yours? Give us a call.

Call (305) 975-9732
What kinds of dents can you repair?

We handle everything from minor door dings and parking-lot dents to larger creases and panel damage from collisions. Bring your car by our shop on NE 45th Street in Oakland Park and we'll assess the dent in person.

Do you work on high-end and sports cars?

Yes. We regularly take on performance and luxury vehicles, including cars like the Camaro ZL1 and McLaren, and give each one careful attention during dent and body work.

Will the paint match after dent repair?

We refinish repaired areas to blend with your car's existing finish so the corrected panel looks consistent with the rest of the body. Stop in and we can review the color match for your vehicle.

Can you fix a dent without repainting?

Depending on the dent's size, depth and location, some can be addressed without a full repaint while others need refinishing. We'll look at your specific dent and recommend the best approach.

How do I get started with a dent repair?

Give us a call at (305) 975-9732 or visit our shop on NE 45th Street in Oakland Park, FL. We'll inspect the dent and walk you through what's needed to restore your vehicle.

Need dent repair? We're ready to help.

Free estimate, written quote, no obligation — and a straight answer about what your home in Oakland Park actually needs.

  • Serving Oakland Park, Fort Lauderdale, Wilton Manors, Pompano Beach
Call Now Get Quote